4.4 Parameter settings
Here you can set some parameters of the IPC, including Video
quality, Time setting, Mail settings, Frequency setting, Chroma
Setting, and Visu Alangle Settings
4.5 Alarm settings
Here you can set alarms, including Motion Detect, Audio Alarm, I/
O Alarm, Privacy Covered alarm, Timing to capture, Timing to
record.
4.6 Init settings
Here you can Restore Factory Set and Restart the system of IPC.
4.7 Live View
When playing the video,
you can capture, record,
open/close the audio or
mic; If the IPC supports
PTZ, you can slide up,
down, left and right on
the screen. As shown in
figure (14).
5. Images View
Click
“Images
View” to playback pictures.
6. Video View
Click
“Video View” to playback records.
7. About
Here you can view the information of the monitor software.
Access to the IP Camera via iPhone
Search and install the surveillance software “Danale” on line to your
mobile from App store. Then you can see the icon of the software
click it to run.
1. Login
Input username and password, click
“Login” in the login interface, you will
enter the “List” interface.
2 List
As is shown in figure(15):
2.1 Add Camera
Click
to add camera, you will see
the picture on the right:
Edit the camera name, input the
username, password, you can input the
camera SN manually or scan the QR
code directly.
3. Video Mode
Click “VideoMode”on the top right to
set the mode of the video, Including
high definition, standard definition and
Automatically.
4. Settings
Click
to set the IPC. See the picture
(16) on the right:
4.1 User name password management
Here you can edit the device name,
username and password
4.2 Basic information
Here you can view the basic information of the IPC, including
4.3 NetWork Settings
Here you can set the local network and
WIFI according to your need.
4.4 Parameter settings
Here you can set some parameters of
the IPC, Including Video quality, Time
setting, Mail settings, Frequency setting,
Chroma Setting, and Visu Alangle
Settings
4.5 Alarm settings
Here you can set alarms, including
Motion Detect, Audio Alarm, I/O Alarm,
Privacy Covered alarm, Timing to
capture, Timing to record.
4.6 Init settings
Here you can Restore Factory Settings
and Restart the system of IPC.
5. Live View
When playing the video, you can
capture, record, open/close the audio or mic; If the IPC supports
PTZ, you can slide up, down, left and right on the screen. As is
shown in the following picture:
6. Images View
Click
“Image” to playback pictures.
7. Video View
Click
“Video” to playback records.
8. About
Here you can view the information of the monitor
software.
Access to the IP Camera via iPad
Search and download the surveillance software
“Danale HD” to your iPad from App store and install
it. Then you can see the icon of the software
,click it to run.
1. Login
Input username and password, click “Login” in the
login interface, you will enter the “List” interface.
2. List
As is shown in figure on the right:
2.1 Add Camera
Click
to add camera, you will see the following picture:
Edit the camera name, input the username, password, you can
4.1 User name password
management
Here you can edit the device
name, username and password.
4.2 Basic information
Here you can view the basic
information of the IPC, including
device information, storage
information, etc.
4.3 NetWork Settings
Here you can set the local
network and WIFI according to
your need.
4.4 Parameter settings
Here you can set some
parameters of the IPC, including
Video quality, Time setting, Mail
settings, Frequency setting, Chroma Setting, and Visu Alangle
Settings
4.5 Alarm settings
Here you can set alarms, including Motion Detect, Audio Alarm, I/
O Alarm, Privacy Covered alarm, Timing to capture, Timing to
record.
4.6 Init settings
Here you can Restore Factory
Settings and Restart the
system of IPC.
5. Live View
When playing the video, you
can capture, record, open/
close the audio or mic; If the
IPC supports PTZ, you can
slide up, down, left and right
on the screen. As is shown in the right picture:
6. Images View
Click
“Image” to playback pictures.
7. Video View
Click
“Video” to playback records.
8. About
Here you can view the information of the monitor software.
FAQ
1.Why cannot capture?
If you capture failed and the storage folder cannot pop up
automatically ,please check your IE, don’t select “Enable protected
mode”.
2.Why can not access the camera after update?
Clean browser cache.
Steps: open IE, click “Tools” and select “Internet Options”, then you
can see “Temporary Internet files” and click “Delete Files”, it will
prompt a dialog you need to check
“Delete all offline content”
3. Why can not show the whole interface?
Close some options of IE.
Steps: Open IE, click ”View” and select “Toolbar”, close the
“Favorites bar”, ”Status bar” and “Command bar”.
4. Why cannot I watch the mobile surveillance video after entering
the login information?
A
、
Please check whether the settings page, server, port, user name,
password and other information are filled in correctly.
B
、
Please check your network to see whether your phone is
connected to the external network .
C
、
If your device is connected to the external network via router,
please check whether the mobile port mapped in the routing .
(For mapping settings, please refer to the router manual).
D
、
Please check whether the IP address you have filled in is the LAN
IP (If your IP starts with the following format, it is a local area
network : 10.xx
、
172.xx
、
192.xx. If you use such IP, you can
only be in the same LAN with the device to be connected).
E
、
Please check your port to ensure that it must be the mobile port.
5. Why does it show “Get Param Failed”?
1.Please check the IP information, such as port.
2.Please make sure the IP Camera connected correctly.
3.The network status is poor.
6. I have already added the device, why it shows “Initial Failed!”?
Solution: Please delete the device and add it again.
The Important Safety Information
Please be sure to read the following important safety information
before install and use the product.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC DO NOT REMOVE COVER OR
BACK NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO
OUALIFIED SERVICE PERSONNEL.
CAUTION:
TO PREVENT ELECTRIC SHOCKS AND RISK OF FIRE HAZARDS, DO
NOT USE OTHER THAN SPECIFIED POWER
SOURCE.
CAUTION:
RISK OF ELECTRIC. DO NOT
OPEN
Notes
：
●
The power supply
must through safe attestation. Its output
voltage, current, voltage polarity
and operating temperature
must match the camera’s requirement
.
●
When using the camera in the thunderbolt condition
,
please
note to mount Anti-thunder device or put off the power supply
plug and cable
.
●
In order to capture high quality pictures, the power supply’s
cable and video output cable should not be too long.
(
14
)
(
17
)
(
18
)
(
15
)
(
16
)
