PRETUL TALI-12PC, Руководство пользователя

Страница: 15 / 24

3
TALI-12PC
27078
3/8” keyless
Cordless drill / driver
wood: 0.6” | metal: 0.2”
Forward - Reverse
21 + 1 function
Code
Description
Chuck
Voltage
Speed
Rotation
Torque
Boring capacity
Battery
Input: Voltage: 127 V
Frequency: 60 Hz
Power: 63 W
Charger
Power cord grips used in this product: Type “Y”.
Charger tool build quality: Reinforced insulation.
Tool build quality: Class III.
12 V
Ion-Lithium 12 V 1.3 Ah | Charging time: 3 hours
Output: 13 V 0,5 A
Power Requirements
WARNING
WARNING
Avoid the risk of electric shock or severe injury. When the power cable gets damaged
it should only be replaced by the manufacturer or at a Authorized Service Center.
The build quality of the electric insulation is altered if spills or liquid gets into the tool while in use.
Do not expose to rain, liquids and/or dampness.
Before gaining access to the terminals all power sources should be disconnected.
Tools with double insulation and reinforced insulation eliminate
the need of a grounded power cord with three prongs or a grounded power
connection.
When using an extension cable, verify the gauge is enough for
the power that your product needs. A lower gauge cable will cause voltage drop
in the line, resulting in power loss and overheating. The following table shows the
right size to use depending on cable’s length and the ampere capability shown in
the tool’s nameplate. When in doubt use the next higher gauge.
WARNING
WARNING
WARNING
from 0 A and up to 10 A
from 10 A and up to 13 A
from 13 A and up to 15 A
from 15 A and up to 20 A
18 AWG(*)
16 AWG
14 AWG
8 AWG
3 (one grounded)
from 6’ to 49’ | higher than 49’
Ampere
Capacity
Number of
Conductors
Extension gauge
* It is safe to use only if the extensions have a built-in artifact for over current protection.
AWG = American Wire Gauge. Reference: NMX-J-195-ANCE
When operating power tools outdoors, use a grounded
extension cable labeled “For Outdoors Use”. These extensions are especially designed
for operating outdoors and reduce the risk of electric shock.
ENGLISH
Technical Data
16 AWG
14 AWG
12 AWG
6 AWG
0 - 350 RPM 0 - 1 300 RPM