CONTROL LITE
is compatible with any
SimplyWorks
®
transmitter unit. Although
primarily designed to be used with a
SWITCH
125
, it is possible to pair
CONTROL LITE
with
any SimplyWorks
®
transmitter. For example, if
paired with a keyboard, the Space key becomes
the activating key, or if paired with an
SimplyWorks
®
TRACKBALL
the left button
becomes the activating key. Uniquely, when an
SimplyWorks
®
JOYSTICK
is used, the stick can
also be used as a 'wobble switch'.
Compatibility
First remove the battery cover on the
underside of the unit. Fit two AAA style
batteries, paying particular attention to ensure
correct orientation (a moulded '+' symbol
indicates the positive terminal location), then
replace the cover. As with all battery powered
products, using good quality batteries such as
Duracell or Energiser is recommended.
If you are not intending to use your
CONTROL
LITE
for an extended period of time, it is
advisable to remove the batteries to prevent
leakage, which may damage the product.
Fitting the Batteries
In most cases the
CONTROL LITE
will be used with a
SWITCH 125
or
SEND
. It does not matter which
mode these are set to,
CONTROL LITE
will Simply Work!
Operating with a SWITCH 125 or SEND
Because the
CONTROL LITE
is a small,
lightweight unit, it may be strapped to a
battery powered toy, for example, allowing
wire-free control of the toy using either a
SWITCH 125
or indeed any other type of switch
via a
SEND
.
Pairing
CONTROL LITE
with an SimplyWorks
®
JOYSTICK
also allows the stick to become a
'wobble switch' to control the toy for users who
cannot easily use a regular switch.
Given the enormous flexibility that the
SimplyWorks
®
concept affords you, there are
countless other learning scenarios that you can
devise as your experience grows.
Learning Scenarios
Your
CONTROL LITE
has no user serviceable parts. If repair is necessary the unit should be returned
to Pretorian Technologies or an authorised distributor.
Maintenance
Features
OUTPUT
PAIR
• Works with any SimplyWorks
®
transmitter to control battery
operated toys or other output devices.
• Single 3.5mm jack plug output via
supplied lead.
• Small enough to strap to a battery
operated toy.
• 10 Metre (32') operating range
• Automatic power saving mode
- no on/off switch.
• Long battery life.
Before your
CONTROL LITE
can be used it must
be paired with the SimplyWorks
®
transmitter
that you require it to work with. To pair the
units, use the following procedure:
1 Place the transmitter unit close to your
CONTROL LITE
.
2 Briefly press the Pair button (A) on the
front panel of the
CONTROL LITE
. The pair
LED (B) will begin to flash slowly.
3 Within 10 seconds, press the Pair button
on the transmitter.
4 The Pair LED on
CONTROL LITE
will continue
to flash for a short time while it negotiates
with the transmitter. Once complete, the
Pair LED will light steadily for 10 seconds
to indicate success.
CONTROL LITE
is then
ready to use. Whenever data is successfully
sent to
CONTROL LITE
its Pair LED flashes
briefly to give visual indication that the
wireless link is operational.
5 If the Pair LED stops flashing after 30
seconds and does not light steadily, repeat
the process from (2). If it is still not
successful, please refer to the
Troubleshooting section.
Pairing information is retained in the
CONTROL
LITE
internal memory even after changing the
battery.
Pairing
OUTPUT
PAIR
A
B
