background image

Learn Mode

Left-Handed Operation

The left and right buttons may be swapped around, which is particularly useful for left-handed users. 
To change this setting, 

press and hold

 the 

left button

 while in Learn Mode. A rising tone means that 

left-handed operation is enabled, whereas a falling two-tone beep means it is disabled. By default, 
left-handed operation is disabled.

Mode Exclusion

By default, all three mode settings are available to the gamer: WASD, Arrow Keys and Mouse. This 
means that three presses of the middle button (or a switch plugged into the right socket, if Mode 
Change has been selected – see below “Right Socket Function”) are needed to get back to the same 
mode. For some users, this may be inconvenient, especially if some of the modes are not used.
This setting therefore allows you to eliminate one of the modes from the list, in which case the mode 
button/ switch becomes a simple toggle action between any two.
To make changes to this setting, press the left button briefly while in Learn Mode. The number of 
beeps indicates which, if any, of the modes are disabled.

Left Socket Function

The left socket may be set to one of three functions, as follows:

Right Socket Function

The right socket may be set to one of three functions, as follows:

To change this setting, press a switch plugged into the 

left socket briefly

 while in Learn Mode. You 

will hear 1, 2 or 3 beeps corresponding with the list above. Press the switch repeatedly until the 
correct number of beeps is heard, according to the setting you would like to use.

Note that if the currently selected mode is excluded as a result of changes you make to this setting, 
the unit is forced into a permitted mode on leaving Learn Mode. This means you may need to toggle 
to the required mode, out of the two that are left enabled. 

All Modes Enabled One beep

WASD and Mouse only Two beeps

Arrow Keys and Mouse only Three beeps

WASD and Arrow Keys only Four beeps

Left Click (default) One beep

Space Two beeps

Escape Three beeps

Right Click (default) One beep

Enter Two beeps

Mode Change Three beeps

Содержание QUESTER JOYSTICK









Отзывы: