2 Settings
Power Button
Replaceable
Pummice
Applicator
Battery
Compartment
To Install or Replace Batteries
1. Make sure the buffer is turned off.
2. Remove back cover by placing
thumb on battery cover and
slide off with downward push.
3. Carefully pull out batteries
(if replacing) and insert 2 new
“AA” batteries.
4. Use the markings in the battery
compartment as a guide to
position the (+) positive or (-)
negative
5. End of each battery
6. Replace back cover by sliding
up cover into closed position.
7. To avoid leakage, check the batteries regularly for deterioration.
8. Remove exhausted batteries and remove the batteries if the
Resurfacing Tool is not to be used for a long time.
Do not mix old and new batteries. Do not mix alkaline, standard
(carbonzinc) or rechargeable (nickel-cadmium) batteries. To dispose
of alkaline batteries, place in the trash (normal municipal waste).
Recycling of batteries at your local recycling center is good for the
environment.
Installing Pumice Stone Head:
Press the Pumice Stone Head (included) onto the connection
opening until it locks into position with a click. If replacing the
Pumice Stone Head, gently pull Pumice Stone Head to remove.
Daily Treatment
Step 1: Cleanse Skin
Before use, thoroughly cleanse and soak areas to be treated. Rinse
well and blot dry.
Step 2:
Attach Pumice Stone Applicator. Press applicator to skin
and turn on selecting desired speed setting.
Step 3:
Use a light circular motion. This step works to remove
rough, dry skin, and refine the skin’s surface. Work each area for
2-5 minutes, depending on your skin’s needs. Wash off residue
with warm water and blot dry.
Step 4: For Use in Combination with your Daily
Moisturizer Routine
Micro-Power Buffer can be used with many of your daily moisturiz-
ing routines. Simply apply your favorite moisturizing after exfoliat-
ing and buffing the skin. The Micro-Power Buffer can be used
daily, morning and night, but if you have especially sensitive skin
or other skin concerns, talk to your doctor or dermatologist about
frequency of use.
Caring For Your Resurfacing Tool
1. Wipe handle with slightly damp cloth. Do not immerse
Resurfacing Tool in water or any other liquid. Do not open the
battery compartment if the appliance is wet to avoid corrosion
to the inside parts.
2. Clean attachments after every use. Remove attachments from
Resurfacing Tool. Do not allow liquid cleansers or moisturizers
to accumulate on attachments or handle.
Replace Pumice Stone Buffer Heads as needed– they can be
purchased from your retailer or online at www.pretika.com.
Micro-Power Buffer Features
