
..
STAPLER SPECIFICATION
STAPLER MODEL……………………………………………………………………………………………………………………PFC50 STAPLER
HEIGHT…………………………………………………………………………………………… …….…………………………….326mm
WIDTH …………………………………………………………………………………………………………………………………205mm
LENGTH………………………………………………………………………………………………………………………………..480mm
NET WEIGHT…………………………………………….……………………………………………….……………………………4.8kgs
ACCEPT MAXIMUM AIR PRESSURE ………………………………………………………………………………………………8kgf/cm2
SUGGEST TO USE AIR PRESSURE………………………………………………………………………………………………….6-8kgf/cm2
LOAD CAPACITY………………………………………………………………………………………………………………………100pcs
STAPLE SPECIFICATION
A
B
C
3mm
45mm
13mm
1. Always read stapler manual before operating.
2. Do not point the tool at anyone.
3. Always wear safety glasses and earmuffs while operating, to ensure safety.
4. Always use accurate the specification of staple, otherwise it will trouble for work.
5. Do not exceed the recommended maximum pressure for the tool. Air pressure should be maintained at 6-8kgf/cm2,
higher pressures will not increase the operating speed of the tool and may cause damage to it.
6. Always disconnect air supply before: work breaks, changing parts, servicing staplers, or storing stapler at the end of
the day.
7. Keep hands and clothing away from the front of Jaws of the stapler and away from all moving parts. Injury may result.
8. Always use suitable lubricant. Do not use bottled gases such as oxygen, hydrogen, carbon dioxide or other
combustible gasses.
9. Never attempt to change the design of the stapler.
10. If safety failure is found, please do not continue to use.
WARNING