Presto HeatDish+TILT Скачать руководство пользователя страница 5

5

Instructions sheet enclosed (see pages 6 and 7). You may also dust the reflector by following these simple steps: 1) Unplug the 

heater and allow to cool; 2) support the heater on its back; 3) slip a soft, lint-free cloth through the grille; 4) move the cloth over 

the surface of the parabolic reflector by inserting a long thin handle (such as a dowel or the handle portion of a wooden spoon) 

through the grille, using it to slide the cloth from spot to spot over the surface of the reflector; 5) remove the handle and the cloth 

when the surface is dust free.

NOTICE:

 If you allow dust to build up on the parabolic reflector, the dust accumulation may cause the heater to overheat and the 

warning buzzer to sound. If this should occur, follow the POWER RESET INSTRUCTIONS on the back of the unit. Then clean 

the parabolic reflector as previously instructed.

4.  If the heater does not work properly after cleaning and following the reset instructions, contact the Consumer Service Department 

at 1-800-877-0441 or at www.GoPresto.com/contact.

5.  Wind the cord around the built-in cord wrap (Fig. A, page 2) for convenient storage. Keep heater in a dry location.
6.  Grasp the handle and tilt the heater down to the storage position. You will feel and hear it lock in place.

Consumer Service Information

If you have any questions regarding the operation of your Presto

®

 appliance, contact us by any of these methods:

•  Call 1-800-877-0441 weekdays 8:00 AM to 4:00 PM (Central Time)
•  Email us through our website at www.GoPresto.com/contact
•  Write:  National Presto Industries, Inc. 

 

Consumer Service Department 

 

3925 North Hastings Way, Eau Claire, WI 54703-3703

Inquiries will be answered promptly by telephone, email, or letter. When emailing or writing, please include a phone number and a 

time when you can be reached during weekdays if possible.
When contacting the Consumer Service Department, please indicate the model and series numbers for the heater. These numbers can be 

found on the bottom side of the plastic base.
Please record this information:
 

Model ______________________  Series ______________________  Date Purchased ______________________

The Presto Factory Service Department is equipped to service Presto

®

 appliances.

Canton Sales and Storage Company

Presto Factory Service Department

555 Matthews Drive, Canton, MS 39046-3251

Product Registration

IMPORTANT:

 Please go online and register this product within ten days of purchase. Proper registration will serve as proof 

of purchase in the event your original receipt becomes misplaced or lost. Registration will not affect warranty coverage, but 

it may expedite the processing of warranty claims. The additional information requested will help us develop new products 

that best meet your needs and desires. To register the product, visit 

www.GoPresto.com/registration

 or simply scan this QR 

code. If you do not have computer access, contact the Consumer Service Department at 1-800-877-0441.

Form 4058-006B

Presto

®

 Limited Warranty

(Applies only in the United States)

This quality Presto

®

 appliance is designed and built to provide many years of satisfactory performance under normal 

household use. Presto pledges to the original owner that should there be any defects in material or workmanship during 

the first year after purchase, we will repair or replace it at our option. Our pledge does not apply to damage caused by 

shipping. 

Outside the United States, this limited warranty does not apply.

To obtain service under the warranty, please call our Consumer Service Department at 1-800-877-0441. If unable to 

resolve the problem, you will be instructed to send your Presto

®

 appliance to the Presto Factory Service Department 

for a quality inspection; shipping costs will be your responsibility. When returning an appliance, please include your 

name, address, phone number, and the date you purchased the appliance as well as a description of the problem you are 

encountering with the appliance.
We want you to obtain maximum enjoyment from using this Presto

®

 appliance and ask that you read and follow the 

instructions enclosed. Failure to follow instructions, damage caused by improper replacement parts, abuse, misuse, 

disassembly, alterations, or neglect will void this pledge. This warranty gives you specific legal rights, and you may also 

have other rights which vary from state to state. This is Presto’s personal pledge to you and is being made in place of all 

other express warranties.

National Presto Industries, Inc., Eau Claire, WI 54703-3703

Содержание HeatDish+TILT








Отзывы: