8-inch Diamond Sharpening Steel
Sharpening Instructions
1. Position the sharpening steel vertically with the tip cap resting firmly on a dry, stable surface, such
as a cutting board.
2. Holding the knife by the handle, position the knife blade at approximately a 20 degree angle against
the steel, as illustrated below. Applying light to medium pressure carefully pull the knife blade
down against the steel and towards you simultaneously. Use a gentle slicing motion that moves your
blade across the steel from heel to tip. It is important that you cover the entire length of the blade
and keep the blade at a 20 degree angle the whole time.
3. Repeat procedure on the other side of the knife blade.
4. Repeat steps 2 and 3 about six times or until knife is sharp.
Note: To ensure the sharpest edge possible, do an equal number of strokes on each side of the knife
blade.
5. Before using the knife to slice food, always wipe the knife blade with a damp cloth to remove any
metal filings that may remain from the sharpening process.
Cleaning Instructions
After each use, clean the sharpening steel with soapy water and a soft brush; never use a steel brush. Dry before storing.
Consumer Service Information
If you have any questions regarding the operation of your Presto
product, contact us by any of these methods:
•
Call 1-800-877-0441
weekdays 8:00 AM to 4:30 PM (Central Time)
•
Email us at our website www.GoPresto.com
•
Write:
National Presto Industries, Inc.
Consumer Service Department
3925 N. Hastings Way, Eau Claire, WI 54703-3703
Inquiries will be answered promptly by telephone, email, or letter. When emailing or writing, please include a phone number and a time
when you can be reached during weekdays if possible.
Any maintenance required for this product, other than normal household care and cleaning, should be performed by our Factory Service
Department. Be sure to indicate date of purchase and a description of defect when sending a product for repair.
Send products for repair to:
Canton Sales and Storage Company, Presto Factory Service Department,
555 Matthews Dr., Canton, MS 39046-0529
The Presto Factory Service Department is equipped to service all PRESTO
products and supply genuine PRESTO
parts. Genuine
PRESTO
replacement parts are manufactured to the same exacting quality standards as PRESTO
products and are engineered specifical-
ly to function properly with its products. Presto can only guarantee the quality and performance of genuine PRESTO
parts. “Look-alikes”
might not be of the same quality or function in the same manner. To ensure that you are buying genuine PRESTO
replacement parts,
look for the PRESTO
trademark.
PRESTO
LIMITED WARRANTY
This quality PRESTO
product is designed and built to provide many years of satisfactory performance
under normal household use. Presto pledges to the original owner that should there be any defects in
material or workmanship during the first year after purchase, we will repair or replace it at our option.
Our pledge does not apply to damage caused by shipping. To obtain service under the warranty, return
this PRESTO
product, shipping prepaid, to the Presto Factory Service Department. When returning a
product, please include a description of the defect and indicate the date the product was purchased.
We want you to obtain maximum enjoyment from using this PRESTO
product and ask that you
read and follow the instructions enclosed. Failure to follow instructions, damage caused by improper
replacement parts, abuse or misuse will void this pledge. This warranty gives you specific legal rights,
and you may also have other rights which vary from state to state. This is Presto’s personal pledge to
you and is being made in place of all other express warranties.
NATIONAL PRESTO INDUSTRIES, INC. Eau Claire, WI 54703-3703
2010 by NPI, Inc
Form 72-942A