PAGE 5 OF 31
0218 IH-3937
S E C T I O N 1
INTRODUCTION
This manual attempts to provide all of the information
necessary for the safe and proper installation, operation
and maintenance of Presto Lifts Inc. battery operated,
Power Stak. It is important that all personnel involved
with the installation, maintenance or operator of the
stacker read this manual. Additional manuals are avail-
able upon request or at www.PrestoLifts.com.
Each Presto stacker is equipped with nameplate, serial
number and model identifications. Please refer to these
numbers when ordering parts or requesting further
information.
The Presto stackers are designed for lifting, lower-
ing and positioning a wide variety of loads. WHERE
UNIQUE SITUATIONS ARISE, WHICH ARE NOT
COVERED IN THIS MANUAL, CALL PRESTO
LIFTS FOR FURTHER INSTRUCTIONS.
The battery operated stackers are designed for in-plant/
non-hazardous locations only. They can be used in a 8'
or larger aisle. These units are not for personnel lifting.
!
WARNING
Maximum Lifting Capacity
UP TO 7’
2,200 LBS.
UP TO 8’
1,800 LBS.
UP TO 10’
1,500 LBS.
Ratings based on 24” Load Center
See Owner’s Manual for details
10055256
This machine is designed for powered
travel and should not be manually moved
by applying force to the Control Pod
Handles
The Control Pod and steering arm should
only be moved side to side when the
machine is under power
The Control Pod and steering arm should
be lowered to the drive position and power,
Forward or Reverse, is engaged by moving
the thumb wheel in the direction of desired
travel then the steering arm can be moved
side to side for directional steering.
Pushing or pulling on the Control Pod
Handles when the unit is not powered can
lead to damage and/or breakage
PRESTO OWNER’S MANUAL
Page 5
POWER STAK
