3
User Manual
RoadRunner 300I
3. Settings
Before recording, you can set up the device according to your requirements.
-
In video/picture preview mode, press [MENU] to enter video/picture
settings, press it again go the general settings, press it third time to exit.
-
In setting list, use
[ ]/[ ] to navigate the menu, press [OK] to get the
options and confirm the selection, press [MENU] to exit.
Video settings
•
Resolution
: Select the resolution of recorded video: 1280x720
, 848X480,
640x480.
•
Time stamp
: Add
date and time
stamp onto videos.
•
Motion detection
: Turn on or off motion detection. If there is any motion detected while the car
engine is stopped, your car DVR will start recording automatically.
•
Video time
: Set the video duration (1, 2, 3, 4, 5 minutes or off) for loop recording. When the
microSD card is full, the device will delete the oldest unlocked video file automatically.
•
Mic. on/off
: Set to turn the microphone on or off.
Picture settings
•
Size
: Select the picture image size from 1.3M, VGA.
•
Time stamp
: Add
date and time
stamp onto pictures.
•
Shutter sound
: Set to turn on or off shutter sound.
General settings
In preview mode, double press [MENU] twice to enter general settings.
•
Format
: Format the memory card.
Formatting will erase all your stored data. Back up your data before proceeding.
•
Language
: Choose your language.
•
Auto off
: Set automatic power off when the device is not in use.
•
LCD auto off
: Set automatic LCD off when the device is not in use, press any button to wake up.
•
Sys. reset:
Restore to default settings.
•
Light freq (frequency)
: For a given luminance, the frequency of light fluctuation that evokes a
sensation of flicker. Set a right flickering frequency to avoid horizontal stripe interference.
•
Date input
: Set date and time on device.
•
Date format
: Set date format on device.
•
Key tone
: Turn on or off the sound when pressing buttons.
•
Firmware version
: Display the current system version.
3
