7
Operate according to the following procedure:
First move the mouse to the zone with coordinates (1,1); press and hold the left button,
and move the mouse to the zone with coordinates (3, 3); then release the left button,
and the blue area is the splicing area selected. Click the right mouse button, and select
“Combine” in the menu bar displayed to combine the zones into a 3 x 3 big screen.
Click the right mouse button again in this area, and select HDMI1 in “Local Channels” to finish
operation.
2. In the area having been combined into a big screen, right click the mouse,
and select
“Decompose”
to decompose the combined big screen into single screens.
3. If the layout combines single screen and multi-screen, in the menu bar after
right clicking the button, you can select the input source and turn on/off backlight.
4. Besides, for the selected area in the layout combining single screen and multi-screen, you
can set Signal Type, Splicing Display/Single Display Mode, Power On/Power Off in the right-side
status bar. (During signal selection, you must click “Execute” in order to switch to the selected
source; if the input mode is matrix input, check “Matrix Linkage” and set the matrix input
channel; also, you can select the input channel of Matrix HDMI/Matrix DVI in the menu
bar after right clicking the button; right click the input channel of matrix, and you
can add the description of channel.)
5. Screen Parameter Adjustment: In the selected area, right click the mouse, and select
“Screen
Parameter Adjustment”
to adjust Brightness, Contrast, Saturation, Backlight, Sharpness, White
Balance, Dark Balance and other parameters. Click “ <- ” to decrease the currently selected
parameter; click “ <+” to increase the currently selected parameter. To restore screen
parameters to factory default, you can click
“Color Reset”,
select and reset a single unit or all
splicing units.
6. Edge Blending: This option only supports operation of single splicing unit after splicing. Prior
to operation, please select a single unit; then click “<- ” or“ <+ ” to move the display interface
horizontally or vertically. After adjusting it to the desired value, click “Apply” to finish edge
blending setting.
Quick Start Guide Prestigio Digital Signage Video Wall
* LCD Video Wall supplied without Software & Splicing control system.
EN - 17
EN