Prestigio P200DVD-X, Руководство пользователя

Страница: 6 / 56

6 PRESTIGIO P200T / PRESTIGIO P200DVD-X
ENG
Check Before Using
Please check the following check list before using the TV.
1 Is the antenna cable connected properly?
2 Is the AC adapter connected properly?
- When you connect the adapter to the unit, turn the power switch on the front panel to “off”, and then connect the adapter
cable.
- When not using the adapter for a long time period, separate the AC adapter from both the main body and the power outlet
on the wall.
3 Are the remote control batteries installed properly?
- Install two AAA size batteries according to the correct polarity.
- The remote control works up to about 7~10m from the TV, 3m to the left or right of the TV, and to within 30 degrees from
the remote control sensor of the TV.
4 Have the receive channels been configured?
5 Are the cables connected to any external devices connected properly?
Watching TV
Turning the TV On and OFF
Press the POWER button on the remote control (or on the front panel of the unit.)
You can also switch on by pressing the PROG buttons.
• When you turn the power ON, the screen appears and the POWER/STANDBY light is turned off.
• When you turn the power OFF, the screen goes blank, and the POWER/STANDBY light turns red.
Selecting the Menu Language
1 Press the TV.MENU button. The OSD MENU will be displayed.
2 Select Function using the \/ /\ button and then press the >
button.
3 Language using the \/ /\ button and then press the > button.
4 Select the desired menu language using the \/ /\ button.
5 Press the EXIT/CANCEL button to exit the menu.
Viewing the Status Information
Press the DISPLAY button on the remote control. The TV will display the input source, the picture mode, the sound mode, the
MTS mode, sleep time and the current time.
Adjusting the Volume
Adjust the volume using the VOL /\ \/ button.
Muting the Sound
Press the MUTE button. You can conveniently use the MUTE button when a telephone or a door bell rings. To cancel, press the
MUTE button again.