Prestigio Collaboration Bar Gamma, Быстрый старт

Страница: 7 / 52

PVCCU8M601
©2021 Prestigio Solutions
TM 7
General Information
Specifications Power supply: DC 5 V/2 A (via USB 3.0 cable). Power consumption (max.): 6.5 W (1.3 A), standby power: 2 W. Sensor 1/2.8" Sony CMOS 8.5MP, UHD
(360p–4K, 30 fps). Output format: MJPG/YUY2. Viewing angle: 128° (diagonal) / 120° (vertical) / 60° (horizontal). Focal Length: 2.2 mm. Focus
distance: 30 cm (min.). Digital Zoom: 5×. Manual lens rotation: vertical 10° (-5°/+5°), horizontal 16° (-8°/+8°). Built-in speaker 10 W, 200–16000 Hz.
Microphones: 6 pcs, 120–16000 Hz. Voice Capture Range: 0~6 m, 180°. Color: gray. Casing material: ABS. Dimensions: 352×118.5×75.5 mm. Net
weight: 0.86 kg. Acceptable operating conditions: air temperature -10 to +40
°C,
relative humidity 10–90 % non-condensing.
Functions Conference call that combines UHD camera and speakerphone. Plug&Play connection. Remote control. Fixed focus, ePTZ function. Backlight
Compensation. Full Duplex support, Noise cancellation, Echo cancellation,
Automatic gain control.
Scope of supply Collaboration Bar Gamma (video camera with speaker, for conferences) PVCCU8M601, cable USB 3.0 A – USB 3.0 B (2 m), power adapter DC 4.0×1.7
(cable 2 m), remote control, lens cover, quick start guide, warranty card.
Warranty 1 year (service life: 2 years)
Installation and setup
1. Unpack the Collaboration Bar Gamma (video camera with speaker, for conferences), and install it horizontally:
- on a table, with the movable clamp/base (.
III-a );
- on a monitor, using the movable clamp/base (. III-a );
- on a tripod, with the tripod socket in the movable clamp/base (. III-b );
- on the wall by fastening with screws (not included) through the holes in the movable clamp/base (. III-c ).
Ensure an unobstructed IR signal from the remote control to the video camera.
2. Connect the video camera to an image output device (e.g. computer, interactive panel) using the USB cable. Insert the USB type B plug into the connector of this video camera
(. I .-10), USB type A plug into the corresponding connector on the image output device. Wait for the notification on the screen that the device has been successfully connected.
When working on a computer, select this video camera as the default sound and image source in the device list (according to the name on the nameplate on the body).
NOTE. The included USB 3.0 cable powers the video camera from the image output device. When connected with a different standard cable (e.g. USB 2.0), you must additionally
connect the video camera to the network using the power adapter (included).
3.
Manually adjust the lens tilt holding the device to prevent it from falling.