background image

10

PrestigeSports 

Treadmill Maintenance Guide

MAINTENANCE INSTRUCTIONS....

FOLLOWING THE CORRECT PROCEDURES 

HOW TO LUBRICATE THE RUNNING BELT:

• 

If the running platform drys out, you will feel the belt sticking when trying to run / walk. You can 
lubricate the belt with either the oil provided or silicone spray. The platform under the belt should 
feel well lubricated when touched. 

• 

To lubricate the platform you need to lift the edge of the belt and squit / spray some lubricant on 
the platform (inline) with where you would run. Do this on both sides and make sure you dont use 
too much. After lubricating the platform you should allow the treadmill to run for a few minutes to 
spead the lubricant. 

USAGE                 TIME             WHEN TO LUBE

LIGHT

2 - 3 Hours Per Week

Every 5 - 6 Months

MEDIUM

HEAVY

4 - 5 Hours Per Week

5 + Hours Per Week

Every 3 Months

Every 1 - 2 Months

For more detailed information including  additional troubleshooting info 
please refer to your user manual or contact your retailer.

CAUTION:

BE CAREFUL 

of moving parts and 

DO NOT

 put your fingers near the running belt. 

REMEMBER

 to always 

remove any jewelry / loose fitting items of clothing and tie back any long hair when working on your tread-
mill.

Содержание XM-PRO II











Отзывы: