Prestige Quick & Easy, Инструкция по использованию и уходу

Страница: 11 / 19

11
To prevent the cooker from opening with pressure inside you must;
check that the secondary safety device come visual pressure indicator
is fully down, do not apply force to move the open / close switch
to the open position and do not force the lid handle to open it.
In the unlikely event of the regulator allowing pressure to reach
higher than normal, the secondary safety device come visual
pressure indicator will operate by opening up in the center
allowing excess pressure to be released. If this occurs, remove
from heat immediately to prevent boiling dry.
Note : never put anything other than the “secondary safety
device come visual pressure indicator” in this position.
secondary safety device come
Secondary Safety Device come Visual
Pressure Indicator
When the pressure starts building up inside the
cooker, the secondary safety device come visual
pressure indicator is pushed up and will rise
above the top surface of lid. This indicates that
your cooker is under pressure, similarly after cooking is over and the
cooker is taken off the heat source, the secondary safety device come
visual pressure indicator will drop when the pressure inside the cooker
drops to “zero”, giving you a visible indication that you can safely
open the cooker.
Secondary Safety Device come
Visual Pressure Indicator
Zero Pressure Device
. This device must always be fitted and
the grommet clean and undamaged to enable it to seal in the
pressure. Its function is to prevent the lid being opened while
there is pressure inside the cooker.
It does this by preventing the Open Closed switch being
moved under normal force.
Note:
The cooker has a design feature which allows a leak
in pressure, if the pressure regulator or the secondary
safety device fail or is blocked.
In such a case the leak occurs as the internal pressure
will push a portion of the gasket out of the slot on the lid rim.
Excess pressure will be gently and safely released through
the hole on top of the lid. For this function the gasket must be
replaced regularly as advised on front cover.