background image

128-8112

3 of 8

3

4) Press and hold the lock or lock/unlock symbol button of the transmitter

you wish to program for 4 seconds or until a long chirp is heard from
the siren.

"Repeat step 4 for each transmitter you wish to program".

NOTE:

If your transmitter button has the Lock/Unlock icon on

one button, press and release the valet push button switch 2 times
then move on to step #8.
5) Press and release the valet push button switch one time to advance to

channel 2. The siren will chirp 2 times and the dash mounted LED will
Flash 2 times, indicating that the unit is ready to accept programming
for  channel # 2 which is only used for separate lock and unlock
button transmitters, and is the disarm/unlock/unlock 2 and panic.

6) Press and hold the unlock symbol button of the transmitter you wish

to program for 4 seconds or until a long chirp is heard from the siren.

"Repeat step 6 for each transmitter you wish to program".
7) Press and release the valet push button switch one time to advance

to channel 3. The siren will chirp 3 times and the dash mounted LED
will Flash 3 times, indicating that the unit is ready to accept
programming for channel # 3 which is the trunk release/alternate
output channel of the system.

8) Press and hold the trunk/key symbol button of the transmitter you wish

to program for 4 seconds or until a long chirp is heard from the siren.

"Repeat step 8 for each transmitter you wish to program".
9) Press and release the valet push button switch one time to advance

to channel 4 if so equipped. The siren will chirp 4 times and the dash
mounted LED will Flash 4 times, indicating that the unit is ready to
accept programming for channel # 4, optional device (where equipped)

10) Press and hold the Option button of the transmitter you wish to

program for 4 seconds or until a long chirp is heard from the siren.

"Repeat step 10 for each transmitter you wish to program".
11) Press and release the valet push button switch one time to ad-

vance to channel 5 if so equipped.  The siren will chirp 5 times and the
dash mounted LED will Flash 5 times, indicating that the unit is ready
to accept programming for channel # 5  optional device (where
equipped)

12) Press and hold the second Option button of the transmitter

you wish to program for 4 seconds or until a long chirp is heard from
the siren.

"Repeat step 12 for each transmitter you wish to program".
13)  Within 10 seconds, press and release the valet program

switch one time.
(Siren emits 6 short chirps indicating channel 6 has been entered)

14. Within 10 Seconds, Press and hold the unlock button, (or any

unused button(s)), of the first transmitter you wish to control
Channel 6 output, (Driver Priority 1) until a long chirp is heard from
the siren.

Содержание Prestige 07S3BP









Отзывы: