14
30
mm min.
40
mm max.
Fig. 4.4
FASTENING THE COOKTOP
Each cooktop is supplied with a set of tabs and screws to fasten it on units with a work-
ing surface from 3 to 4 cm deep.
The kit includes 4 tabs
A
and 4 self-threading screws
B
(fig. 4.4).
• Cut the unit.
• Turn the hob upside down and rest the glass side on a cloth.
• Spread the seal
C
around the edge of the hob (fig. 4.5).
• Put tabs
A
into the mountings; only tighten screws
B
a few turns.
Make sure that the tabs are mounted correctly as shown in the figures 4.4 - 4.5.
• Put the cooktop into the hole cut into the unit and position it correctly.
• Put tabs
A
into place, tooth
D
of the tabs should go into the hole.
• Tighten screws
B
until the cooktop is completely secured.
• Using a sharp tool cut off the part of gasket
C
which protrudes from the cooktop.
A
D
B
C
Fig. 4.5
C
C
C
C
A
Adhesive side