Prestige Platinum APS-590TWC Скачать руководство пользователя страница 6

128-6819

6 of 12

DISARMING THE SYSTEM
1. As you approach the vehicle, press and release the Unlock button on the key-

chain transmitter.

þ

 Dash mounted LED turns off.

If passive arming was selected during the installation, then the LED
will start flashing rapidly, indicating that the system is re-arming auto-
matically. Open any door to suspend the automatic arming.

þ

 Parking Lights flash two times.

If the parking lights flashed three times, then the alarm was trig-
gered in your absence. Before turning the key on, examine the LED to
identify which zone was triggered.

þ

 Siren sounds two chirps.

If the siren sounds 4 chirps, then the alarm was triggered in your
absence. Before turning the key on, examine the LED and refer to the
INTRUSION WARNING SIGNALS section of this manual to iden-
tify which zone was triggered.
If the siren did not sound when disarming, then the chirps have
been turned off, and you should refer to the section titled “ELIMI-
NATING THE ARM / DISARM CHIRPS“ in this manual.

o

 Doors Unlock - Optional

Note: If the optional 2 step door unlock circuit is installed, when the unlock

transmitter button is activated, the drivers door only will unlock, press-
ing the unlock button a second time will cause all doors to unlock.  If
your transmitter has a separate lock unlock buttons, pressing the
unlock button anytime after the first unlock command will cause all
the vehicle doors to unlock.

o

 Headlight Illumination - Optional

SILENT DISARMING
1. As you approach the vehicle, press and hold the Unlock button on the keychain

transmitter for 2 seconds.

þ

 Dash mounted LED turns off.

If passive arming was selected during the installation, then the LED will
start flashing rapidly, indicating that the system is re-arming automatically.
Open any door to suspend the automatic arming.

þ

 Parking Lights flash two times.

If the parking lights flashed three times, then the alarm was triggered in
your absence. Before turning the key on, examine the LED to identify which
zone was triggered.

þ

 Siren will not sound.

If the siren sounds 4 chirps, then the alarm was triggered in your absence.
Before turning the key on, examine the LED and refer to the INTRUSION
WARNING SIGNALS section of this manual to identify which zone was
triggered.

o

 Doors Unlock - Optional

6

Содержание Platinum APS-590TWC













Отзывы: