7
INSTALLATION OF PRESTIGE HOBTOP
While unpacking, make sure that all parts of the hobtop are available as per the picture shown
above.
The Prestige hobtop can be used as a gas stove or as a hob depending on your preference. If you
want to install the hobtop as hob, please follow the instructions carefully.
Please ensure that the installation is carried out by a competent / qualified technician. The company
is not responsible for damage / injury caused by faulty installation.
Please make sure that the hobtop is placed in a properly ventilated area.
• Cut the granite slab / counter top according to the size mentioned in the figure (1). For your
convenience, we have provided the template for marking. Make use of the template.
• Please make sure that the granite slab / counter top is cut properly to ensure that the alignment
of the hobtop is correct with respect to the counter top.
• Please make sure that the cut size is not big, as it may lead to more loads on the hobtop thus
damaging the hobtop with time.
• Place the hobtop such that it sits firmly on the slab and the bottom cover goes inside the cut
portion of the granite slab.
Connecting the nozzle to the gas pipe (gas hose)
1. The knobs on the hobtop should be in the “OFF” position at the time of fitting.
2. Push the rubber tube that is attached to the gas regulator (cylinder) on to the gas tube connector
as far as it goes. Use only prescribed ISI marked LPG hose for connecting, as it is safe. Do not
use a vinyl plastic tube or a tube with metallic cover, as this can be dangerous. The tube should
not be twisted, looped or kinked, or subjected to external pressure of any kind.