Prestige APS-122E, Руководство по установке

Страница: 9 / 12

128-9346
9 of 12
Page 9
Programmable Features :
Feature Selection 1 Chirp 2 Chirps 3 Chirps 4 Chirps Default
1st Door L/UL 1 Sec. 3.5 Sec. 1 S L, Dbl.U/L 1 Sec.
2nd Accy Lock Auto Lock On Auto Lock Off Off
3rd Accy. UL Auto UL Dr Auto UL Off Off
4th Passive Locks Passive Active Active
5th Passive/Active Arm Passive Arm Active Arm Active Arm
PROGRAMMING BANK 1 (TRANSMITTERS):
1) Turn the ignition key to the ON position.
2) Press and release the valet/programming switch 3 times (Siren Chirps).
3 Press the Lock Button of each transmitter you want programmed until you hear a chirp from the horn or siren.
4) Press and release the valet/programming switch 1 time to advance to channel 2, Unlock. Press the unlock button of
each transmitter you want to unlock the vehicle.
5) Press and release the valet/programming switch to advance to channel 3, Trunk, press the Trunk button of each
transmitter you want to operate trunk release.
4) Turn the ignition switch to the OFF position.
The above action programs the Lock, Unlock, Start/Trunk functions of the system, i
PROGRAMMING BANK 2 (ALARM FEATURES):
You can enter bank 2 from bank 1 by turning the ignition key off then on from step 4 of Bank 1.
(Siren Short then Long Chirp), or You can also go right to bank 2 by:
1) Turn the ignition key to the ON position.
2) Press and release the valet/programming switch 3 times (Siren Chirps).
3) Turn the ignition key off then on. (Siren Short Then long Chirp)
4) This action puts you at feature 1 of bank 2. Use the lock button of the transmitter to select feature setting, or press
the valet/programming switch once to advance to feature 2, twice to advance to feature 3, etc.
Example to set passive arming:
1) Turn the ignition key to the ON position.
2) Press and release the valet/programming switch 3 times (Siren Chirps).
3) Turn the ignition key off then on. (Siren Short Then long Chirp)
4) Press the push button switch three times to advance to features 4, Passive locks,then use the lock button of the
transmitter to select one chirp, passive locks active.
5) To exit the programming mode, turn the ignition key off. The program mode is automatically exited when
there is no activity on the push button switch or the transmitter lock button for 30 seconds