Prestel HD-PTZ703-710U2, Руководство пользователя

Страница: 22 / 30

21
Restore default: YES/NO. Color style and video format cannot be restored to factory default
Note: If the address of former remoter is not 1 but another one from 2, 3, 4, the corresponding camera
address will restore to 1 when all parameters or system parameters are restored. User should change the
remoter address to be 1 (press No.1 according to the camera so to get normal operation).
4. Serial Port Communication and Control
The camera could be controlled through RS232/RS485 interface; RS232C serial parameter are as follows:
Baud rate: 2400/4800/9600/115200 bits / sec; Start bit: 1; data bits: 8; Stop bit: 1; Parity: None.
After power on, the camera first goes left, then back to the middle position. Self-test is finished after the zoom
moved to the farthest and then back to the nearest position. If the camera saved 0 preset before, it will be back to
that position after initialization. At this point, the user can control the camera by the serial commands.
4.1 VISCA Protocol list
4.1.1 VISCA Protocol Return Command
Ack/Completion Message
Command packet
Note
ACK z0 41 FF Returned when the command is accepted.
Completion z0 51 FF Returned when the command has been executed.
z = camera a 8
Error Messages
Command packet
Note
Syntax Error z0 60 02 FF
Returned when the command format is different or when a command
with illegal command parameters is accepted
Command Not Executable z0 61 41 FF
Returned when a command cannot be executed due to current
conditions. For example, when commands controlling the focus
manually are received during auto focus.
RESTORE DEFAULT
＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝＝
Restore Default? NO
[
↑↓
]Select [
← →
]Change Value
[Menu]Back [Home]OK