4
G
Operating instructions for Pneumatic grease pump 50:1
Operating instructions for Pneumatic grease pump 50:1
G
2. General Safety Advice
2.1 Signs and symbols used in the safety instructions
The safety instructions used in these operating instructions are divided into various levels of hazard.
Various levels of hazard are indicated in the instructions with the following keywords and pictograms:
Pictogram
Keyword
Consequences of failure to comply with the
safety instructions
Warning
Possible death or serious injury
Caution
Possible slight or not serious injury or material damage
In addition, a further instruction is used which gives general tips for handling the product.
Pictogram
Keyword
Meaning
Tip
Background information or tips about how to use the product
2.2 Information on safety at work
The grease pump has been designed and manufactured according to the health and safety requirements
of the relevant EC guidelines.
Nevertheless, there can still be risks if the product is not set up or operated as stipulated.
Therefore, before using the grease pump, read these operating instructions and pass them on to other
users of the pump.
When operating the grease pump, the local safety and accident prevention rules and regulations always
apply, as well as the safety advice in the operating instructions.
Only approved PRESSOL maintenance personnel should open or repair pumps within the guarantee
period.
Attention! The compressed air line must be disconnected and the discharge pistol actuated to ensure
so the pump is depressurised before the pump unit is opened or inspected. For safety reasons the
compressed air line should be disconnected when the pump is not in use otherwise the pump will remain
pressurised.
Caution!
If the grease pump is incorrectly installed, or used for a purpose other than that
originally intended for, it can result in personal injury or damage to equipment!
Before starting to use the grease pump, read through these operating instructions carefully and
completely.
