21
en
Maintenance
Expected service life of the changing table is 9 years, provided that
maintenance is carried out as described below:
It is recommended on a weekly basis to run the motors on the product to their
maximum positions by raising the product to its full height, and then lowering
it to its lowest position, so that the internal parts are lubricated.
It is recommended that maintenance inspection is done once a year.
Maintenance inspection
Take the changing table to its highest position.
Disconnect mains
before inspection.
• Check the wall brackets
①
and tighten if necessary.
• Check all electrical connections to the control box
②
.
• Oil moving parts, especially the sliding brackets
③
.
• Check the sink drain
④
for leaks (if a sink is fitted).
Reconnect mains.
1
1
1
2
3
3
4
Содержание R8711
