2 Hookup
2.1
Rear Panel Connections and Controls
Sceptre
™
S6 and S8
Owner’s Manual
3
2
Hookup
2.1
Rear Panel Connections and Controls
2.1.1
Inputs
Line-level Inputs. The Sceptre S6/S8
provides a choice of two balanced
inputs: XLR and ¼” TRS. These inputs
accept a line-level signal from your
audio source and feed that signal
to the monitor’s built-in power
amplifiers. When both balanced
connections are in use, the TRS
input supersedes the XLR input.
Note:
Make sure your audio source’s
XLR or ¼” TRS wiring corresponds
to that of the Sceptre S6/S8.
Input Level: Sets the amount of gain applied to the
input signal. This is not a volume control in the traditional
sense; instead, it sets the level of the input signal before
it is amplified.
2.1.2
Power
IEC Power Connection: Your Sceptre S6/
S8 accepts a standard IEC power cord.
Warning:
Do not remove the center grounding prong or
use a ground-lift adapter, as this could result in electric
shock.
Sleeve:
Ground
Ring:
[-]
Tip:
[+]
1
2
3
Ground
XLR
TRS
[-]
[+]
