PRESONUS Revelator io24, Руководство пользователя

Страница: 79 / 136

74
6
6.2
Mixing and Loopback Audio
Mixer Controls
Revelatorio24
Owner’sManual
6.2 Mixer Controls
混合器控制
6.2.1 Microphone ChannelControls
麦克风输送控制
1. +48v. Engages/dis48vpowerforusewith
condensermicrophoneslikethePreSonusPX-1orM7.
2. Gain. Use this control to set the gain for your connected microphone or
instrument. Gain can also be set using the Encoder knob on your Revelatorio24.
3. Reverb. UsethiscontroltosettheamountofReverbapplied
tothesignal.Reverbsettingscanbesetuptotasteusingthe
Reverb section. See section 5.1.7 for more on Reverb .
4. Pan. Thissetsthepanpositionforyoursignalineverystereomix.Pansetsthe
position of the microphone relativeto the left and right side of the mix.When
the Panis set tothe centerposition, your microphone will sound equally in
both the left and right side of the mix. As you turn it to the right, it will be louder
in the right side. As you turn it to the left, it will be louder in the left side.
5. Clip Light. This light will illuminate red when the input signal is too
loudandclipping.Ifyourinputsignalclips,itwill overloadtheRevelator
io24’s analog-to-digital converters, causing digital distortion. This
sounds terrible.If yourecorda signal with digital distortion, there
is noundoingitor fixingit. And becauseofthis,it’simportant to
keepyoureyeonthisindicatorwhileyou’resettingyourlevels.
6. Channel Meter. This meter displays the current level
of your microphone before the fader level.
7. Gain Reduction Meter. This meter displays the amount of gain reduction being
applied to yourmicrophone signalby the gate,compressorand/or limiter.
8. Microphone Channel Fader. Controls the Overall Level of the
Microphone Channel in the currentlyselected mix.
9. Mute. Mutes the signal in every stereo mix.
10. Solo. Solos the signal in every stereo mix.
11. Channel Link. Clicking thislinks Channels 1 and 2 to act as a single
stereoChannel,suitableforstereoinstrumentslikekeyboards.
12. ChannelName. Double-clickingontheword“Microphone”will
let youcustomizethe name of the microphone channel.
1. + 48 v
。使用
/
断开
+48v
电源，用于电容麦克风，如
PreSonus PX-1
或
M7
。
2.
获得。使用此控件可为连接的麦克风或仪器设置增益。增
益也可以使用你的启示器
io24
上的编码器旋钮进行设置。
3.
混响。使用此控件设置应用到信号的混响量。混响设置可
以设置为味觉使用混响部分。更多关于混响的内容请参见
5.1.7
节。
4. Pan
。这设置了你的信号在每个立体声混音中的平移位
置。平移器设置麦克风相对于混合器左右两侧的位置。当
Pan
被设置到中心位置时，你的麦克风将在混合的左右两边
发出同样的声音。你向右转，右边的声音就大一些。当你把
它转到左边时，左边的声音会大一些。