Deutsch
Español
Fr
anç
ais
English
5
DigiMax
™
DP88 User Manual
A Quick Note About DB25
DB25 connectors provide eight balanced channels on a single analog
connector. Balanced DB25 fan-out snakes can be obtained in various
configurations at most recording and live-sound retailers. Common
configurations are DB25 to (8) XLRM, DB25 to (8) XLRF, and DB25 to (8) TRS.
ADAT – S/MUX Input and Output. These are the ADAT – Dual S/MUX connections to connect
your DigiMax DP88 to your audio interface. When the sample rate is set to 44.1 or 48 kHz, only
the ADAT 1 input and output will function. When set to 88.2 or 96 kHz, each connection will
provide four of the available eight channels:
Power User Tip:
When connecting your DigiMax DP88 to a Studio 192, the ADAT
connections will also send and receive preamp control information for the DigiMax
DP88 so that it can be controlled directly from UC Surface or Studio One.
BNC Input and Output. These allow the DigiMax DP88 to receive and transmit word clock to and from other
digital audio devices.
MIDI I/O. This is the connection for the included MIDI I/O break-out cable. You can use the MIDI connections
to send and receive control data for your microphone preamps in your DAW application. Once you
configure your DigiMax DP88 as a MIDI device inside your DAW application, you can control trim and
phantom power from within your DAW environment and store those settings with your session.
Below is a chart explaining the MIDI controls for your DigiMax DP88 preamps:
Preamp
MIDI Channel
Trim Level
Phantom Power ON /OFF
Direct Line In On/Off
Preamp 1
Channel 1
CC #7
CC #14 (0 to 63 = On, 64 to 127 = Off)
CC #15 (0 to 63 = On, 64 to 127 = Off)
Preamp 2
Channel 2
CC #7
CC #14 (0 to 63 = On, 64 to 127 = Off)
CC #15 (0 to 63 = On, 64 to 127 = Off)
Preamp 3
Channel 3
CC #7
CC #14 (0 to 63 = On, 64 to 127 = Off)
CC #15 (0 to 63 = On, 64 to 127 = Off)
Preamp 4
Channel 4
CC #7
CC #14 (0 to 63 = On, 64 to 127 = Off)
CC #15 (0 to 63 = On, 64 to 127 = Off)
Preamp 5
Channel 5
CC #7
CC #14 (0 to 63 = On, 64 to 127 = Off)
CC #15 (0 to 63 = On, 64 to 127 = Off)
Preamp 6
Channel 6
CC #7
CC #14 (0 to 63 = On, 64 to 127 = Off)
CC #15 (0 to 63 = On, 64 to 127 = Off)
Preamp 7
Channel 7
CC #7
CC #14 (0 to 63 = On, 64 to 127 = Off)
CC #15 (0 to 63 = On, 64 to 127 = Off)
Preamp 8
Channel 8
CC #7
CC #14 (0 to 63 = On, 64 to 127 = Off)
CC #15 (0 to 63 = On, 64 to 127 = Off)
Power User Tip:
Studio One version 3+ provides a device template for the DigiMax DP88 if you are not
using it with the Studio 192. Simply select it from device list in the External Device set-up window.
Power Input. This is where you connect the power supply for your DigiMax DP88.
13 12 11 10 9
8
7
6
5
4
3
2
1
25
14
15
16
17
18
19
20
21
22
23
24
C
G
H
C
G
H
C
G
H
C
G
H
G
C
H
G
C
H
G
C
H
G
C
H
1
2
3
4
5
6
7
8
ADAT 1 Input
ADAT 2 Input
ADAT 1 Output
ADAT 2 Output
44.1 / 48 kHz
Channels 1-8
n/a
Channels 1-8
n/a
88.2 / 96 kHz
Channels 1-4
Channels 5-8
Channels 1-4
Channels 5-8
