Battery Installation and Maintenance
1. Remove battery compartment cap.
2. Replace battery. Place the “+” sign of battery face up toward battery
compartment cap.
3. To charge batteries, connect USB cable from Monocular to either
a computer USB port or to the USB charger adapter and plug into a
power outlet.
4. 10 hour charging time is recommended for first time charging.
Operation of Monocular
Reading of the Screen Icons
Operating Procedures
1. Remove object lens cap.
2. If Off, click and hold On/Off button for 3 seconds to turn on.
If On, click and hold On/Off button for 3 seconds to turn off.
3. After initial screen ends, look through the eyepiece. The screen
should appear as shown in the following image.
4. Refer to prior page for icon descriptions/explanations.
03727
03727
1
2
3
4
To Observe
• Always remove the objective lens cap
• Look through the eyepiece lens
• Confirm if it is on Photo Mode or Video Mode (Both are
Observation Modes)
• Adjust Ocular scale for eye focus
• Next, adjust focal length by adjusting Focusing ring
• Focus until you obtain a clear and sharp image
• Adjust digital magnification power if needed by clicking UP button to
increase Power or clicking DOWN button to decrease power
• Current Mode/Photo Mode/Observation Mode
• Video Mode/Observation Mode
• Battery Life
• Flash card
• Capacity of storage; image quantity
+
PROW071 www.Presmainc.com
Presma Owl Series Digital Night Vision Monocular Manual
www.Presmainc.com PROW071
Presma Owl Series Digital Night Vision Monocular Manual
