PRESIDENT CV 24/12V - 15 A Pro, Руководство пользователя

Страница: 5 / 8

5
VERIFICATION AND TROUBLESHOOTING
If after making the connections as described in point 2 or after performing the steps
described in points 3 and 4 there are malfunctions, that is, either the status LED ( 3 )
is off or is on and red, before returning the product at the point of sale for requesting
the support service verify that:
• There are not short circuits in input or in output to the converter;
• The polarity of input and output connections is correct, namely, there are not
polarity inversions in the connections.
• The current required by the connected devices does not exceed the rated output
current of the converter.
PRECAUTIONS AND WARNINGS
• Install this product in a dry, well-ventilated, indoor area protected from atmos-
pheric agents, dust, dirt and liquids of all kinds.
• Do not use the converter in explosive atmospheres or near flammable materials
and gases.
• Pay attention to do not create short circuits to both the input and the output of
the converter.
• Make sure that the polarity of all connections is correct.
• Do not connect devices that require a current greater than the output rated cur-
rent of the converter.
• To prevent damages and electric shock hazards, do not try to connect 110/220V
AC sources to the converter.
• Ensure that the battery voltage does not exceed the maximum input voltage of
the converter.
• To avoid completely discharging the battery, keep the engine of your vehicle
running when using the converter.
• Before making any connection make sure that device to be connected is turned
off.
• Keep clean from dust and dirt the external parts of the converter, especially the
ventilation holes.
• Ensure that the reducer is well ventilated, do not obstruct the ventilation holes on
the casing.
• Do not open the converter neither try to insert objects or materials of any kind.
• Any modification to the converter can generate dangers and voids any guaran -
tee.
• In case of doubts, malfunctions or breakdowns, contact the dealer where you
purchased the inverter.