Presence iPecs LIP-9008, Руководство по эксплуатации

Страница: 21 / 23

Operation Guide Add On Packet LIP-9008 and LIP-9008G
Ring tones
Eight ring tones are built into the LIP-9008 and LIP-9008G stations.
1. Dial [Transfer] [11] to alter your standard ring tone.
(a) To alter your DID/external call ring tone dial [Transfer] [12]
2. Select a ring tone by dialing [1] through [8], once dialed your selection will begin to play a preview.
3. Press [Hold] to save your selection or [Speaker] to exit.
Send Dialing (Enblock dialing)
This feature is most simply described as making the station dial like a cellular phone. Once enabled
you may take as much time as you wish to dial, after you have finished you must press the [Send] soft
key on the screen.
1. To toggle enblock dialing on or off press [Transfer] [10]
2. Press [1] to enable or [0] to disable.
3. Press [Hold]
Headset management
1. Multiple different headset manufacturers and models can be connected to your station.
(a) Headsets or their associated base must use an RJ10 handset style connector.
2. The station offers a headset port on the back of the station to which the headset may be connected.
Otherwise follow the directions for wiring your headset and base that came packaged with your
headset.
(a) Using the headset port will enable the headset but disable the speakerphone.
i. The benefit to using the headset port is the station can control headset volume and present
ringing to the headset if configured.
(b) To enable or disable the headset port:
i. Press the [Headset] button. It will light red.
(c) To control whether your station or headset rings for new calls
i. Dial [Transfer] [62]
ii. The screen will display options for headset ring type
A. Dial [1] for normal ringing at the station.
B. Dial [2] to ring only your headset.
C. Dial [3] to ring both your station and headset.
iii. Press [Hold] to save your selection.
Page 17