prepmaster STI-2807, Руководство по эксплуатации

Страница: 19 / 40

Operating Manual STI-2807 | STI-2817LP
17
3.6 STI-2807 Operating Features
The Variable Speed Drive is carrying all controls and instruments used for supervision and
control of the machine.
Key Button Controls Start/ Stop
Pushing the Key Button "Start" will switch the controls on and start the motor. Pushing the
Key Button “Stop” will stop the motor running.
Arrow up and Arrow Down
While powered but without the motor running, the red Arrow Up and red Arrow Down buttons
can be used to set the motor speed faster or slower than the base RPM of the motor.
Rotation
While powered but without the motor running, the “Rotation” button is used to change the
rotation of the motor. Press the “Rotation” button and press “Enter” within 2 seconds to
change the motor rotation. To change back to previous rotation repeat the process
Auto/Man and Prog/Run
These buttons are used for drive diagnostics and programming and are not used.
Emergency Stop Button
The Emergency Stop Button is intended to be used for the safety of the operator and
protection of the machine from excess damage in the event of an emergency. The Lanyard
must be worn by operator for this safety device to work properly.
Manual On/Off Switch – If Equipped
The On/Off switch is used to turn off all power supplied to the grinder.
3.7 STI-2817LP Operating Features
Key Controls Start/ Stop
Turning the key to "Start" will start the motor. Pushing the Rocker Switch will engage the
clutch and start tools turning.
Kill Switch
Kill Switch is intended to be used for the safety of the operator and protection of the machine
from excess damage in the event of an emergency. Push the Kill Switch to shut down the
motor.