3.UNPACKING WAYS OF MAIN PARTS
4. Pull out the front control panel
screws, and then remove the
top cover screws.
①
Pull out the front control panel
screws (sometimes need to
remove the hole cover)
②
Remove the top cover front and
back screws.
5. Take down the top cover
subassembly, and put it
in the right place
(
avoid
to scratch the top cover
subassembly
)
6. Remove the controller board
screws, pull out the controller
board terminals
,
and then
take down the controller
board and the front control
panel.
①
Remove the controller board
screws,
pull out the controller
board terminals(When you
plug wire and connect wires,
you must insert terminals to
the roots for not easily pulling.)
②
Take down the controller board
and the front control panel
separately
7. Take down the back control
panel, cover switch, nozzle
,
water level sensor
,
and
internal wire subassembly .
①
Remove the back control panel
screws, and take out the back
control panel.
②
Remove the cover switch l
screws, and take out cover
switch.
③
Take down the nozzle.
④
Remove the water level sensor
screws, and take out the water
level sensor.
⑤
Take out the internal wire
subassembly .
8. Take down cover pin, twist
spring and take out cover
subassembly
①
Take down cover pin
②
Take down twist spring and
take out cover subassembly.
17
