Notes
Do not use detergent
s
or
solvent
s
with sand or acid.
The drain hole shall be cleaned regularly to ensure water can be drained. Clean the drain hole with
a thin stick or something similar.
W
ine
Cooler Maintenance
Disconnect the cooler
Unplug
the
power plug to disconnect the cooler.
Stop
using
the cooler
If the cooler
is going to be
left unused for a long time, please:
1.Unplug the cooler;
2.Clean the cooler;
3.Keep the cooler door open.
Clean the cooler
Dust behind the cooler and on the ground shall be timely cleaned to improve the cooling effect and
energy saving. The interior of the cooler should be cleaned regularly to avoid odor. Cleaning procedure
is below:
1.
Unplug power plug or disconnect cutoff
；
2.
Clean
the
door seal with only clear water and give
it
a
thorough wipe
；
3.
Use slightly warm water and a little dish soap to clean
the cooler.
Do not let water spil
l
onto
operation control elements and
panel
on glazed door
；
4.
Reconnect and power cooler when cleaning is completed.
Do not use hard brushes, clean steel
sponges
, wire brushes, abrasives such
as toothpastes, organic solvents (such as alcohol, acetone, banana oil, etc.),
hot
water, acid or alkaline items
to
clean the cooler considering that this may
damage the cooler surface and interior.
Do not rinse with water so as not to affect the electrical insulation properties.
10
