Premium PAC12040A, Инструкция по использованию и уходу

Страница: 14 / 18

Press the
16 to 32 ,Display will change as you touch
the button.
+ or - button,you can set the temperature
range from
9. or button
10. CLEAN button
a. When remote controller is at the off state, press clean
button, the wind guiding bars turn to initial postions for
cooling, the A/C runs
clean function with max duration
35mins.The purpose of its function is to clean dust on
evaporator and dry the inside water of evaporator and
to prevent the evaporator going moldy due to water
deposition and boasting strange smell.
b. After setting
clean function, press clean button
again to cancel clean function or press ON/OFF
button to cancel clean function and start A/C.
c. The clean function will not work after 35 minutes
running working without any operation.
Note: clean function can be set in parallel with
time start function; in this case , time start
function will be executed after clean function.
11. MODE
button
AUTO COOL DRY HEAT FAN AUTO
Remark: cold wind type has no heating function.
Which enables you to select different operation mode,
after each pressing, the operation mode will be changed. It
shows in the following display.
12. SLEEP
button
1.press the SLEEP button, the sleeping indicator light of
indoor unit flashes on.
2.after the setting of sleeping mode, the cooling operation
enables the set temperature to increase 1
after 1hour
and another 1 automatically after 1 hour.
3.after the setting of sleeping mode, the heating operation
enables the set temperature to drop 2
after 1hour and
another 2 automatically after 1 hour.
4.the air-conditioner runs in sleeping mode for 7 hours and
stops automatically.
Remark: press the MODE or ON/OFF button, the remote
controller clears sleeping mode away.
11
20