Premium Leisure Sterling Leisure, Руководство пользователя

Страница: 41 / 76

Passion, Essence, Desire, Pure, Pristine (ML700)
Figure 30 – ML700 Topside Control Panel
Control Panel Legend
Heat icon: Indicates different stages of heating
Jets icon: Spins fast on high speed; spins slow on low speed
Light icon: Light is on/off
F1, F2 indicators: Filter cycle 1 or 2 will be illuminated
PL, TL indicators: Locking Panel or Set Temperature will be illuminated
Temperature Up/Down Buttons
Press the Arrow Up or Arrow Down buttons once to display the set temperature.
Each time either button is pressed again, the set temperature will increase or
decrease depending on which button is pressed. After three seconds, the LCD
display will automatically display the current temperature the hot tub water.
Mode Button
This button is used to switch between standard , economy and sleep modes.
Press “Mode” To enter mode programming, press “Cool” through to desired
mode (LCD flashes until confirmed), then press “Mode” to confirm selection.
Standard mode heats the spa water to the set temperature. The “Standard” icon
will display until the mode is changed.
Page 41
For HELP, call 727.573.9611
Economy mode heats the spa water to the set temperature only during filter
cycles. The “Economy” icon will display until mode is changed. Pressing “Jets 1”
button while in Economy mode puts the spa in “Standard-In-Economy mode,”
which operates the same as Standard mode, and then reverts to Economy mode
automatically after one hour. During this time, a press of the “Mode” button will
revert to Economy mode immediately. Because your hot tub is equipped with a
24-hour circulation pump the filtration cycle program operates only on a limited
basis. At the start of each filter cycle the blower (if equipped) will run for 30
seconds; and the pump 1 (low) and, if equipped, pump 2 (high) will run for five
minutes to prevent the spa water from becoming stagnant in the plumbing and air
lines and improve skimming action to remove debris and suspensions from the