Premium Leisure Leisure Edge LE630, Руководство пользователя

Страница: 36 / 60

Page 34
For HELP, call 727.573.9611
F r e q u e n t l y A s k e d Q u e s t i o n s
Who do I call for warranty information or service?
Call our customer care center between 8 a.m. and 5 p.m. EST Monday through
Friday at 727.573.9611. Our representatives are eager to assist or you can order
parts online at
www.HotTubParts.com .
How do I bleed air from my system?
When draining and refilling your hot tub, the pump may become air locked. Air-
locked pumps stop water from flowing in your hot tub and is easily resolved by
bleeding off the trapped air. To do this:
1. Turn off the GFCI (or RCD) breaker
2. Open the access panel below the topside control panel
3. Loosen a heater union until you hear the trapped air escape
4. Once water drips out in a continuous stream, hand tighten the union until the
water stops leaking
5. Loosen the discharge union on Pump 2 (if equipped)
6. Once water drips out in a continuous stream, hand tighten the union until the
water stops leaking
7. Turn on all pumps to make sure that there are no leaks
8. Put the access panels back on
9. Turn on the GFCI (or RCD) breaker
Figure 25 - Bleeding Air
Where can I get more Chemicals or other accessories?
Visit www.HotTubParts.com or call 877.530.PARTS.