Premisys ALR 28+14, Справочное руководство

Страница: 27 / 34

Alarm Cards 1-17
Alarm Cards Alarm Card User Screens and Settings
ACT ON
This parameter defines the condition that will cause the switch to trigger. You can program
each alarm switch to trigger on info, minor, major, or crit alarms. Alternatively, the switch
trigger can also be assigned to a particular sensor. When sensor is selected, SENSOR # allows
you to indicate the number of the sensor that will trigger the alarm. The default value is major.
SENSOR #
When the ACT ON field is set to sensor, you can enter a value from 1 to 28, indicating the
number of the sensor that will trigger the switch. The default value is n/a.
STATUS
This is a display-only field; you cannot edit it.
1.3.6 Voice Screen
An RJ-11 FXS voice port is located on the ALR 28+14 Card between the two Amphenol
connectors. The initial Voice Screen for this port is shown in Figure 1-12. To go to this screen,
press “v” (Voice command) in the Alarm Sensor Screen.