Premise CW2 Series Скачать руководство пользователя страница 3

Страница: 3 / 3

HOW TO INSTALL CONTINUED

Attach the fixture housing (A) to the

junction box by aligning the holes on the

housing with the the two Small Pin Cross

Machine Screws (AA) on the junction box

from Step 1.

Turn the housing (A) clockwise to lock

the fixture in place, then tighten the Small

Pin Cross Machine Screws (AA) to secure.

With the fixture secured, insert the

Pointed Pin Cross Wood Screws (CC)

through the housing (A) and fasten the

screws into the ceiling. Repeat for all 4

screws.

Reinstall the diffuser (C) by sliding the

diffuser back into place. Reattach end
piece (D) using their two screws.

Installation is now complete.

Содержание CW2 Series

Страница 1: ...achine Screws x 2 AA Wire Nuts x 3 BB Pointed Pin Cross Wood Screws x 4 CC Wall Anchors x 4 DD WHAT YOU LL NEED Screwdriver Drill Wire Cutters Wiring supplies as specified by Electric Code Read all sa...

Страница 2: ...e junction box Do not tighten 2 Remove the diffuser C Do this by removing the two screws attached to an end piece D then sliding the diffuser out 3 Connect the ground wire from the junction box to the...

Страница 3: ...housing A clockwise to lock thefixture in place then tighten the Small Pin Cross Machine Screws AA to secure 6 With the fixture secured insert the Pointed Pin Cross Wood Screws CC through the housing...