![background image](http://html1.mh-extra.com/html/premio/ct-xsl01-series/ct-xsl01-series_user-manual_1596697035.webp)
CT-XSL01 | User’s Manual
Watchdog Timer:
Logical Device: 8
CR F0h. Watchdog Timer I (WDT1) and KBC P20 Control Mode Register
Location: Address F0h
Attribute: Read/Write
Power Well: VCC
Reset by: LRESET# or PWROK
Default: 00h
Size: 8 bits
CR F1h. Watchdog Timer I (WDT1) Counter Register
Location: Address F1h
Attribute: Read/Write
Power Well: VCC
Reset by: LRESET# or PWROK
Default: 04h
Size: 8 bits
35
Chapter 3: Features & Interface
BIT
READ / WRITE
DESCRIPTION
7/5
Reserved.
4
R/W
Watchdog Timer | count mode is 1000 times faster.
0: Disable.
1: Enable.
(If bit-3 is 0, the count mode is 1/1000 second mode.)
(If bit-3 is 1, the count mode is 1/1000 minutes mode.)
3
R/W
Select Watchdog Timer | count mode.
0: Second Mode.
1: Minute Mode.
2
R/W
Enable the rising edge of KBC reset (P20) to issue a time-out event.
0: Disable.
1: Enable.
1
R/W
Disable / Enable the Watchdog Timer | output low pulse to the
KBRST# pin (PIN59)
0: Disable.
1: Enable.
0
Reserved.
BIT
READ / WRITE
DESCRIPTION
7/0
R/W
Watchdog Timer I Time-out value. Writing a non-zero value to
this register causes the counter to load the value into the Watch
Dog Counter and start counting down. If CR F2h, bits 7 and 6 are
set, any Mouse Interrupt or Keyboard Interrupt event causes the
previously-loaded, non-zero value to be reloaded to the Watch
Dog Counter and the count down resumes. Reading this register
returns the current value in the Watch Dot Counter, not the
Watch Dog Timer Time-out value.
00h: Time-out Disable
01h: Time-out occurs after 5.03x10
7
CLKIN cycle time, by analogy.
(5.03x10
7
x (1/48MHz) = 1.046s)
Содержание CT-XSL01 Series
