Premio CT-DR101, Руководство пользователя, Страница: 56 / 72

CT-DR101 l User’s Manual
Console Redirection Settings
56
Chapter 4: BIOS Setup
Item Options Description
Terminal
Type
VT100
VT100+,
VT-UTF8,
ANSI [Default],
Emulation: ANSI: Extended ASCII char set. VT100: ASCII char set. VT100+:
Extends VT100 to support color, function keys, etc. VT-UTF8: Uses UTF8
encoding to map Unicode chars onto 1 or more bytes.
Bits per
second
9600,
19200,
38400,
57600,
115200 [Default],
Selects serial port transmission speed. The speed must be matched on the
other side. Long or noisy lines may require lower speeds.
Data Bits 7,
8 [Default]
Data Bits
Parity None [Default],
Even,
Odd,
Mark,
Space
A parity bit can be sent with the data bits to detect some transmission errors.
Even: parity bit is 0 if the num of 1's in the data bits is even. Odd: parity bit is 0
if num of 1's in the data bits is odd. Mark: parity bit is always 1. Space: Parity
bit is always 0. Mark and Space Parity do not allow for error detection. They
can be used as an additional data bit.
Stop Bits 1 [Default],
2
Stop bits indicate the end of a serial data packet.
Flow
Control
None [Default],
Hardware RTS/CTS
Flow control can prevent data loss from buffer overflow. When sending data, if
the receiving buffers are full, a 'stop' signal can be sent to stop the data flow.
Once the buffers are empty, a 'start' signal can be sent to re-start the flow.
Hardware flow control uses two wires to send start/stop signals.
VT-UTF8
Combo Key
Support
Disabled,
Enabled [Default]
Enable VT-UTF8 Combination Key Support for ANSI/VT100 terminals
Recorder
Mode
Disabled [Default] ,
Enabled
With this mode enabled only text will be sent. This is to capture Terminal data.
Resolution
100x31
Disabled [Default] ,
Enabled
Enables or disables extended terminal resolution
Putty
KeyPad
VT100 [Default],
LINUX,XTERMR6,
SCO,ESCN,VT400
Select FunctionKey and KeyPad on Putty.