manualshive.com logo in svg

Premio Computer Apollo, Руководство пользователя

Поделиться
Скачать
Premio Computer Apollo Скачать руководство пользователя страница 97

AWARD

®

  BIOS Setup

3-21

HDD Power Down

If HDD activity is not detected for the length of time specified in this field, the
hard disk drive will be powered down while all other devices remain active.
Settings are 

Disabled

 and 

1 through 15 Min

.

Soft-Off by PWR-BTTN

This feature allows users to configure the power button function. Settings are:

Instant-Off

The power button functions as a normal power-on/-
off button.

Delay 4 Sec.

When you press the power button, the computer
enters the suspend/sleep mode, but if the button is
pressed for more than four seconds, the computer is
turned off.

Wake Up by PCI Card, Power On by Ring, Wake Up On LAN, USB KB/MS
Wake-Up From S3

These fields specify whether the system will be awakened from power saving
modes when activity or input signal of the specified hardware peripheral or
component is detected.

Note: To use the function of “Power On by Ring” and “Wake Up On
LAN”, you need to install a modem/LAN card supporting power on
function.

CPU THRM-Throttling

The item allows you to specify the CPU speed (at percentage) to which it will
slow down when the CPU reaches the predetermined overheat temperature.
Settings range from 12.5% to 87.5% at 12.5% increment.

Resume by Alarm

The field is used to enable or disable the feature of booting up the system on
a scheduled time/date.

Date (of Month) Alarm

The field specifies the date for Resume by Alarm. Settings: 0~31.

Time (hh:mm:ss) Alarm

The field specifies the time for

 Resume by Alarm. F

ormat is <hour>

<minute><second>.

Содержание Apollo















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды