background image

   The following parts are included:  

 

    • Power Supply

    • Two (2) Germicidal Twin H Lamp (packed in lamp box)

    • One (1) Oxidation unit with lamp installed

    • Sixteen (16) Sheet Metal Screws

When installing and using this electrical equipment, basic safety precautions

should always be followed including the following:

1. READ AND FOLLOW ALL INSTRUCTIONS.

2.

 Always be sure the unit is unplugged during installation or service procedures.

3.

 

The ultraviolet light produced by the UV lamp is harmful to your eyes.  Do not look directly at 

    the lamp.  Should it become necessary to view the lamp, use UV-protected sunglasses.

Lors de l’installation et de l’utilisation de cet équipement, des précautions devront être suivies.

1- Lire et suivre les étapes attentivement.

2- Assurez vous de toujours débrancher avant l installation ou le service.

3

Ne pas regarder la lampe directement avec les yeux. Si nécessaire de le faire, 

    veuillez porter les lunettes de soleil contre les rayons U.V.

IMPORTANT: SAFETY INSTRUCTIONS

Important: Instructions de securité

 • Four (4) Caution Labels

 • Strain Relief Connector

 • Alcohol Pad for Cleaning Lamps

 • Installation & Maintenance Instructions

MUV7-100TR

MultiVoltage UVC System

  

Installation & Maintenance

Instructions

UNPACKING THE UNIT

Each unit is shipped with the germicidal lamps placed in a box with protective packaging. When handling lamps take 

care to not touch the glass portion of the lamp with bare hands. Oils from the hands can cause “hot spots” which 

reduce lamp life. Handle by the end caps or use a soft cloth. If you accidentally touch a lamp, use the alcohol pad 

included or clean it using a soft cloth dampened with rubbing alcohol. The lamp is fragile and proper care must be 

taken when removing from packaging.

Содержание MUV7-100TR








Отзывы: