8 3/4”
4”
UV
Lamp
1. Cut out area of template indicated by the grey area.
2. Place template on the return path (or supply side) of the HVAC system and trace the hole
pattern for the unit and mark centers for mounting screws.
3. Cut opening for the unit. (Or use a 2” hole saw centered over the area marked.)
4. Install unit into air duct using the four self tapping sheet metal screws provided.
INSTALLATION TEMPLATE MUV-401H
Use a 2” hole saw to cut opening indicated by the gray circle.
LSK07401H-16
UVC16HCP-RF
LAMP KITS FOR MUV-401H
#LSK07401H-16
36-Watt UVC lamp service kit with 16” UV lamp.
#LSK07401H-12
24-Watt UVC lamp service kit with 12” UV lamp.
#UVC16HCP-RF
36-Watt 16” UV lamp with built in reflector.
#UVC12HCP-RF
24-Watt 12” UV lamp with built in reflector.
