503-16 MultiVoltage Oxidizing UV-V Air Purifier
This unit is designed for commercial use only.
Never install in a residential setting.
Installation & Maintenance Instructions
UNPACKING THE UNIT
Each unit is shipped with the 16” lamp installed in the oxidizing chamber.
Take care to not touch the glass portion of the lamp with bare hands. Oils
from the hands can cause “hot spots” which reduce lamp life. Handle by
the end caps or use a soft cloth. If you accidentally touch a lamp, clean
it using the supplied alcohol cleaning pad or a soft cloth dampened with
rubbing alcohol. The lamp is fragile and proper care must be taken when
removing for cleaning.
The following parts are included:
• 503-16 air purifier
• 16” UV-V lamp
(installed)
• Four self tapping sheet metal screws
• Installation & maintenance instructions
• 120 VAC power cord (PC-120)
• Alcohol cleaning pad
When installing and using this electrical equipment, basic safety precautions should always be followed including the following:
1. READ AND FOLLOW ALL INSTRUCTIONS.
3.
Always be sure the unit is unplugged during installation or service procedures.
4.
The ultraviolet light produced by the UV lamp is harmful to your eyes. Do not look directly at
the lamp. Should it become necessary to view the lamp, use UV-protected sunglasses.
Lors de l’installation et de l’utilisation de cet équipement, des précautions devront être suivies.
1- Lire et suivre les étapes attentivement.
3-
Assurez vous de toujours débrancher avant l installation ou le service.
4-
Ne pas regarder la lampe directement avec les yeux. Si nécessaire de le faire,
veuillez porter les lunettes de soleil contre les rayons U.V.
IMPORTANT: SAFETY INSTRUCTIONS
IMPORTANT: Instructions de securité
