P-9
According to the Color System of the TV, you can choose the TV System.
NTSC: Choose this settings if your VIDEO player is connected to a NTSC TV.
PAL: Choose this settings if your VIDEO player is connected to a PAL TV.
AUTO: Choose this settings if your VIDEO player is connected to a multi-system TV.
The default setting is NTSC.
TV TYPE
SCREEN SAVER
LAST MEMORY
If the screen saver is on, when your
is in Stop, Open, of No Disc state,or there
is a frame frozen for a while, the screen saver will be displayed. This feature can protect the
screen from damage.
VIDEO player
It can record the last playback moment when you stop your
same VIDEO player next time, you can continue to play the last playback moment by pressing
the button directly. Press
“
STOP
”
button during playback. Then press
“
PLAY
”
button.
VIDEO playback. When playing the
ANGLE MARK
If the disc has camera angle function, the screen will show the angle mark.
ON: Choose this setting to activate the angle mark.
OFF: Choose this setting to cancel the angle mark.
The default setting is OFF
C) AUDIO
DIGITAL OUTPUT
There are a few types of output format for digital output:
The default setting is OFF.
The default setting is OFF.
ON: Choose this setting to activate the Last memory function.
OFF: Choose this setting to cancel the Last memory function.
ON: Choose this setting to activate the screen saver.
OFF: Choose this setting to cancel the screen saver.
THE default setting is ON.
OFF: Choose this setting to switc off the function.
BTS: Choose this setting to choose BTS format.
LPCM: Choose this setting to choose LPCM format.
The default setting is STEREO.
DOWNMIX
LT/RT: Choose this setting, it will be sound like in a movie theatre if the original movie the
disc was recorded from was encoded in the Pro Logic Digital format.
STEREO: Choose this setting for 2-channel sound playing stereo signal output.
DUAL MONO (LEFT + RIGHT)
Choose this option to setup the L and R mono output mode. There are four modes in this option:
STEREO, L-MONO, R-MONO, and MIX-MONO. It is mainly used in karaoke mode.
The default setting is MIX-MONO.
DYNAMIC:
When
“
LINE OUT
”
is selected, choose this setting to adjust the line out ratio and
get different effect. If adjusting to FULL, the audio signal peak value will be the minimun; while
adjusting to OFF, maximum.
The default setting is OFF.
Notes: This option will be validated when the DOWNMIX OFF.
LPCM OUTPUT (Optional)
Choose this option to set the LPCM output:48kHz or 96kHz.
The default setting is 48kHz.