CONNECT DVD PLAYER TO OTHER APPLIANCES
Page 11
TROUBLESHOOTING
If your DVD player does not seem to be functioning properly, check the items below before you
contact an authorized service center.
Symptom Check
Power does not turn on or
suddenly turns off.
y
Make sure the AC adapter is securely plugged into an AC
outlet.
y
Turn the power off and then back on.
Battery pack is in place
but the power does not
turn on or suddenly turns
off.
y
Check that the battery pack is charged. If not, recharge it.
Remote control won't
work
y
Check that the batteries are inserted in the "+" and "-"
direction properly.
y
The batteries may be flat. Replace them with new ones.
y
Check that the signal transmission is directed at the remote
control sensor on the DVD player.
y
Remove the obstacle between the remote controller and
remote control sensor.
No picture or sound
y
Check that the A/V cables are securely connected.
y
Check that the disc is a DVD (region number 1 or all), DVD-
RW or AUDIO CD.
y
Do not use a disc that has scratches or dirt.
y
Check that the label-side of the disc is facing up.
y
The pick-up lens of the DVD player may be dirty. Contact the
service center for lens cleaning.
y
Check that the TV channel is set to VIDEO or AV if viewing
with a TV.
No picture
y
Check that the LCD display is turned on.
No sound
y
Check that the display panel is open. If it is closed, audio will
not be output to the speakers.
y
Check the volume setting. If set to zero, turn up volume level.
y
Check that the headphones are plugged into the PHONES
socket. Speakers cannot be used with the headphones.
No picture and sound
y
Check that the battery is properly installed and AC Adapter is
properly connected.
Distorted video or sound
y
Use a disc without scratches or dents.
ATTENTION:
The unit may be submitted to changes in specifications, characteristics and/or operation without
prior notice to the user, in order to continue improving and developing its technology.