Page 4
AC OPERATION
Connect the plug to the AC socket of the unit and the other end to a standard AC outlet.
ATTENTION
1. Do not plug or unplug the power cable while you have wet hands;
2. When planning not to use this unit for a long time, disconnect the power cable from the wall outlet;
3. When disconnecting the power cord from the wall outlet, do not pull on the cord in order to avoid shock risks caused by
damaged cable.
BATTERY OPERATION
Disconnect the AC Cord Set completely. Open the Battery Compartment Door and insert eight pieces UM-1
"
D
" size batteries
into the battery compartment with battery polarity as shown inside the battery compartment.
SET THE CORRECT TIME
Before starting to set the time, make sure that the unit is turned off.
1. Press and hold the Time Set button and press the Hour button to set the hour.;
2. Press and hole the Time Set button and press the Minute button to set the minute.
MP3/AUX IN CONNECTION
1. Insert the audio cable (requires 3.5mm stereo plug, not supplied) into the Line Out Jack or Phones Jack on your MP3
Player into the corresponding AUX Input Jack on your main unit;
2. Turn on your main unit and slide the Function Selector to AUX position;
3. Make sure your AUX in component is turned on, and follow your component’s instruction;
4. To stop this function, simply slide the Function Selector to Tape position.
RADIO OPERATION
1. Press the Power Button to turn the unit on;
2. Set the Function Selector to Radio position;
3. Select the desired frequency band with the Band Selector;
4. Adjust the Tuning Control to tune in a radio station.
FM STEREO INDICATOR
When turn to a FM stereo broadcast the "FM ST." LED Indicator will light up.
ANTENNA
For best reception, fully extend the FM Antenna to receive FM stations. For AM reception, the unit has a built-in antenna, turn
the whole unit for best reception.
CASSETTE OPERATION
Tape Playback
1. Press the Eject Button to open the cassette door, insert a cassette tape into the Cassette Compartment and push the
cassette door to close;
2. Slide the Function Switch to Tape position and press the Play Button to start playing the tape;
3. Adjust the Volume Control Knob to your desired volume level;
4. To stop the tape, simply press the Stop Button.
Fast Forward and Rewind
The tape can be fast forward or rewind by pressing the Fast Forward Button or Rewind Button respectively.
Pause Function
During playback or recording, the tape can be stopped temporarily by pressing the Pause Button. To continue playback or
recording, press the Pause Button once again.
