Premier SCR-4709TVD, Инструкция по эксплуатации

Страница: 14 / 59

10/11 . / Buttons
(tune, Seek, Track, Skip Up/down)
a) In DISC, USB mode:
if you wish to jump forwards or back-
wards press briefly the or button.
Press and hold up for more than two
seconds to begin Fast Forward (or down
for Fast Reverse) mode. Press the
button again as needed, to cycle thru the
range of available speeds.
Digital Video/VCD/CD/MP3:
Normal Playback 2x 4x 8x 20x
b) In Radio Mode:
Press
the or button
to start the
search for a radio station
briefly to manu-
ally tune the radio in single steps. Press
and hold for two seconds
automatically.
7.APS Button
Automatic Memory Function:
In Radio mode, press and hold the APS
button for about 2 seconds to active
automatic station storage. The radio
searches within the current frequency
band, e.g. FM1, for the strongest station
are then allocated to the corresponding
storage locations. Then the station of
the first storage location is set. If you
would like to search for more stations
in the FM band, press the BND button(5)
in order to change to the FM2 or FM3
band. Press it longer again for about 2
seconds to continue search.
Program Scan Function:
In Radio mode, press it briefly to scan
and play all the preset sations in order,
and it will hold at each band for about 5
seconds . If you like one of them, press
the PLAY/PAUSE button to stop the
scanning .
9. /CH 1-6
(RADIO PRESET)
A). In Disc Playback Mode
Press this button to pause playback,
press it again to resume playback.
B) In Radio Mode
you can store 30 stations in memory:
18 FM stations and 12 AM(MW) stations,
each band stores up to six preset
stations .
In BT music mode, press the button to
end the telephone call or reject an
incoming the telephone call .
6. EQ Button
Press the EQ button briefly to turn to
equalization function and to select
desired audio mode.
There are five kinds of mode as below:
Press it longer to switch the LOUDNESS
function ON and OFF .
JAZZ CLAS POP ROCK USER
8.MUTE Button
Press this button to turn off the audio.
Press again to restore the volume to the
prior level. You can also disable the
MUTE function by turning the VOL +/-
knob.
The operation as below :
-Store in Memory
> Select the frequency band
> Press repeatedly the button to select
the desired memory key .
> Select the station
> Keep the desired memory key pressed
in until the station is heard again after
a brief interruption .
-Retrieve a preset station
press the button repeatedly to retrieve
a station which had been stored in the
memory in advance the chose number
is shown on display .
P-13