Premier RR-4708, Инструкция по эксплуатации

Страница: 10 / 12

P-3
CONNECTING THE UNIT TO POWER
Switch the voltage selector on the AC/DC adaptor to the voltage of the electricity supply in your area.
Plug one end of the AC adaptor into the DC power Input, and then plug the other end into AC wall outlet.
Before switching on the unit, make sure that the voltage of your electricity supply is the same as that
indicated on the rating plate.
BATTERY BACKUP
Insert 2 pieces UM-3 ‘ AA ’ size battery into the back-up battery compartment. Be sure to observe the
proper polarity (the "+" and "-" signs) as indicated inside the battery compartment.
In case of power failure or interrupted AC power, the current time and alarm time settings, the stored
radio stations are preserved in the memory of the unit by means of battery back-up function.
SETTING THE CLOCK
1. With the unit in CLOCK mode, press and hold the CLK/MEM button for about 1 second, the time will
begin to flash on the LED display.
2. Press the HOUR button to adjust the hour.
3. Press the MIN button to adjust the minute.
4. When the correct time is selected, press the CLK/MEM button again to confirm.
SETTING THE ALARMS
1. With the unit in CLOCK mode, press the AL1 or AL2 button. The ALARM time will begin to flash on
the LED display.
2. Press the HOUR button to adjust the alarm hour.
3. Press the MIN button to adjust the alarm minute.
4. When the correct time is selected, press the AL1 or AL2 button to confirm.
5. Press the AL1 or AL2 button again to select the alarm sound mode - buzzer or currently set radio
station. The alarm buzzer or radio indicator will flash, when the desired alarm sound mode is
reached, stop pressing the AL1 or AL2 button, and after about.5 second, the alarm sound mode will
stored to the memory.
SNOOZE FUNCTION
1. Whenever the alarm activates, it can be temporarily suspended for a short period of 9 minutes by
pressing the SNOOZE/SLEEP button once.
2. The buzzer or radio will then automatically activate again after the 9 minutes SNOOZE period has
ended.
3. This procedure can be repeated for up to approximately one hour.
TURN OFF THE ALARM
When the Alarm activate, press the SOURCE button to turn off the Alarm.