Premier MDP-4806C, Инструкция по эксплуатации, Страница: 9 / 11

10
、
TROUBLES AND REMEDIES
Table 2
Trouble
Possble causes
Remedies
Mortor unable
running,
Running too
Slow, or
Getting hot
Sticking of
main
compressor
Tarrible shake
Or abnormal
noise
Pressure
insufficient or
discharge
capacity
decreased
The oil
Consumption
too excessive
(1)Fault in line,or voltage insufficient
(2)Power wire too thin or too long
(3)Fault in pressure switch
(4)Fault in motor
(5)Sticking of main compressor
(1)Moving parts burnt due to the oil
insufficient
(2)Moving parts damaged,or stuck by
foreign body
(1)Connecting part loosed
(2)Foreign body got into main
compressor
(3)Piston knocking valve seat
(4)Moving parts seriously worn
(1)Mortor running too slow
(2)Air filter choked up
(3)Leakage of safety valve
(4)Leakage of discharge pipe
(5)Sealing gasket damaged
(6)Valve plate damaged,carbon buildup
or stuck
(7)Piston ring and cylinder worn of
damaged
(1)Oil level too high
(2)Breath pipe choked up
(3)Piston ring and cylinder worn or
damaged
(1)Keep the level within set range
(2)Check and clean
(3)Repain or replace
(1)Check the line
(2)Replace the wire
(3)Repair or replace
(4)Repair or replace
(5)Check and repair
Check crankshaft,bearing,connecting
rod,piston,piton ring, etc.and replace
if necessary
(1)Check and retighten
(2)Check and clean away
(3)Replace with thicker paper gasket
(4)Repair or replace
(1)Check and remedy
(2)Clean or replace the cartridge
(3)Check and adjust
(4)Check and repair
(5)Check and replace
(6)Replace and clean
(7)Repair or replace
P-7
WWW.PREMIERMUNDO.COM