Page 16
Procedure for Extended Non-Use (More than 2 months)
7XUQRIIWKHZDWHUVXSSO\WRWKH52V\VWHPDWWKHDGDSWDYDOYHDQGRSHQWKH52IDXFHWWR
HPSW\WKHVWRUDJHWDQN6DYHDIHZRXQFHVRI52ZDWHU2QFHWKHVWRUDJHWDQNLVHPSW\
remove the membrane and place it in a sealed plastic bag with the RO water saved earlier
and store in your refrigerator.
)RUUHVWDUWUHLQVWDOOPHPEUDQHDQGIROORZVWDUWXSSURFHGXUHRQSDJH
2QFHDOOZDWHULQWKHWDQNLVSXUJHGFKHFNDLUSUHVVXUHXVLQJDQDLUSUHVVXUHJDXJHLWVKRXOG
UHDGEHWZHHQ36,'LJLWDODLUSUHVVXUHJDXJHLVUHFRPPHQGHG
Check Air Pressure in the Tank
Important:
Step 3
Check air pressure only when tank is empty of water!
Step 1
Turn off the incoming water supply to the RO.
2SHQWKH52)DXFHWDQGDOORZZDWHUWRGUDLQIURPWKHWDQNXQWLO
it is completely empty.
Step 2
Check air pressure in the storage tank when you notice a decrease in available water from
the RO system. Air can be added with a bicycle pump using the schrader valve that is located
on the lower side of the tank behind the blue plastic cap.
Tip:
When water from the RO faucet slows to a trickle, with the faucet still in the open posi-
tion, you may add air to the tank to purge any left over water, this will ensure that the
tank is completely empty.
Step 4
)ROORZVWDUWXSSURFHGXUHRQSDJH
